1.
Which of the following signal types of signal typically use the PSTN analog phones to connect?
a. GDTMF
b. Loop start
c. Echo
d. CCS
2.
By using ground start signaling which of the given below issues is prevented?
a. CAS
b. Off-hook signal
c. Mirrored communication
d. Glare
3.
Which signaling type represents supervisory signaling?
a. Ground Start
b. Dial tone
c. Off-hook signal
d. Congestion
4.
Usage of analog connectivity what can be a disadvantage of following?
a. Limited calls per line
b. TCP
c. Conversion complexity
d. Lack of common voice services
5.
By using which type of process we can samples an analog waveform at timed intervals to obtain a digital measurement of the electrical signal?
a. PAM
b. Codec
c. Dial tone
d. Quantization
6.
To send multiple voice calls over a digital signal circuit by dividing the calls into specific time slot, which of the given below system we can choose?
a. DE-MUX
b. MUX
a. TDM
b. TCP
7.
Which bits are used to transmit signaling information within each voice channel?
a. The eighth bit of every sixth frame
b. The second and third bits of every third frame
c. The first bit of each frame
d. The last bit of each frame
8.
Below are given the list of how large is each T1 frame sent over a digital CAS connection, Which is the correct one?
a. 16 bits
b. 193 bits
c. 80 bits
d. 240 bits
9.
Which of the given below time slots are used for E1 and T1 signaling while using CCS connections?
a. Time slot 17
b. Time slot 16
c. Time slot 1
d. Time slot 23
10.
The standards crated by the ITU designate international numbering plans for devices connected to the PSTN, Which of the following is correct?
a. ITU-161
b. ITU-T
c. T-161
d. E.164
11.
What can be a disadvantage of using VoIP over a traditional PBX system?
a. Reduced cabling costs for new buildings
b. To track a user’s location in the network
c. Support of larger-scale deployments
d. Digital and IP phone signaling support
12.
In Cisco Unified Communications model, which of the given below is not valid layer?
a. Dial tone
b. Network
c. Infrastructure
d. Call processing
13.
Which is the ideal call processing component for 25 persons and planned to make it double in size over next three years?
a. Cisco Unified Communications Manager Express
b. Unified Communications 500
c. Cisco Unified Communications Manager
d. Cisco Unified Communications Manager Business Edition
14.
To use the Cisco Unified CME, which platforms, Which of the following could be used?
a. Cisco Media Convergence Server (MCS)
b. Cisco 3550 Switch
c. Cisco 1861 Router
d. Cisco UC500
15.
How we can say Unified Communications Manager Business Edition is better than Unified Communications Manager? list any one of following.
a. Integrated voice mail support
b. SIP-based signaling support
c. Support of non-Cisco IP phones
d. Support of larger-scale deployments
16.
Which of the following advantages would you gain by using a full Cisco Unity solution over Cisco Unity Connection?
a. Text-to-speech support
b. The ability to receive voice mails through an e-mail client
c. The ability to manage voice mails using a web interface
d. Integration with legacy voice-mail systems
17.
Which of the given below is correct about which application provides an ACD service for a Cisco VoIP network?
a. Cisco Communications Manager
b. Cisco Unified Contact Center
c. Cisco UC500
18.
Which of the following function is provided by Cisco Unified Mobility application?
a. To allow users to only log out of IP phones on the network
b. To auto-forward VoIP devices to different locations based on time of day
c. To link a single phone number to multiple devices
d. All above are correct.
19.
A phone with three lines and a custom XML application is needed for tracking, Which of given below Cisco IP phone model will meet the need?
a. Cisco 7911G
b. Cisco 7960G
c. Cisco 7941G
d. None of above is correct
20.
To convert signals from analog fax machine into VoIP packes, which of the below device meet our need?
a. Cisco Expansion Module
b. Cisco ATA
c. Cisco 7985G
d. Cisco 3911
21.
To power a Cisco 7941G IP Phone, which of the given below methods can be used?
a. Cisco 3550 Switch
b. 802.1Q
c. Local power brick
d. Cisco 7960G
22. What type of signal is sent by Cisco Inline Power to detect an unpowered Cisco device?
a. +8 DC voltage
b. Fast Link Pulse
c. Cisco Discovery Protocol
d. Polarity reversal
23.
Below given is as same as a VLAN term, which is correct?
a. ISL
b. Broadcast domain
c. Port security
d. Collision domain
24.
To connect a Cisco Switch to a non-Cisco Switch device, which of the following trunking protocols can be used?
a. VTP
b. 802.1Q
c. Cisco UC500
d. All above are correct
25.
Which of the given below protocols replicates the VLANs over trunk link?
a. VRRP
b. 802.1Q
c. VTP
d. DSL
26.
By default which VTP mode can be used by a Cisco Switch?
a. a.Client
b. Transparent
c. Server
d. VTP is disabled by default.
27.
What will be the result if a switch interface is set to switchport mode dynamic auto is connected to another switch interface set to the same mode?
a. The interface enters an err-disable state.
b. The interface maintains the default mode.
c. The interface becomes a trunk port.
d. The interface becomes an access port.
28.
Which command of the given below can be used to forward DHCP request from an interface which is connected to 172.16.1.0/24 subnet to a DHCP server with 172.16.100.100 IP address?
a. ip helper-address 172.16.100.100
b. ip helper-address 172.16.1.0 172.16.100.100
c. forward-protocol 172.16.1.0 255.255.255.0 172.16.100.100
d. All above commands can be used.
29.
When a Cisco IP phone receives PoE and starts the boot process, how does the Cisco Switch communicate voice VLAN information?
a. Voice VLAN information must be statically entered on the Cisco IP phone.
b. Using 802.1Q
c. Through CDP
d. Using the proprietary ISL protocol
30.
Which of the following DHCP option provides the IP address of a TFTP server to a Cisco IP phone?
a. Option 20
b. Option 150
c. Option 290
d. Option 40
31.
Which of the given below NTP stratum numbers are considered the best?
a. Stratum 0
b. Stratum 2
c. Stratum 10
d. Stratum 3
32.
How many Cisco IP phones can have a Cisco 2801 CME Router support?
a. 50
b. 8
c. 24
e. 144
33.
Which of the given below is required license to operate a Cisco Unified CME router?
a. User license
b. Phone license
c. Phone user license
d. Router license
34.
Which model would be used if we need the number of lines on each IP phone to match the number of phone lines coming from the PSTN?
a. Limited model
b. Hybrid model
c. PBX model
d. Shared line model
35.
Which of the following command can be used to extract a bundle of CME files into the flash of the router?
a. copy
b. extract
c. xtract
d. archive
36.
Which files of Cisco IP phone can download from TFTP server during the boot process?
a. Music on Hold
b. XML templates
c. Firmware
d. All above are wrong
37.
In tftp-server command what is the primary function or alias syntax?
a. To hide the original filename to increase network security
b. To make files in subdirectories accessible without entering the full path To rename files
c. To allow multiple files to be accessed through one filename
38.
How to make accessible the firmware files to IP phones if once downloaded and copied to the flash memory of a router?
a. The firmware files are copied to an external TFTP server by the router and downloaded directly to the IP phones
b. The firmware files must be manually made available by using the tftp-server command.
c. The firmware files are made available through TFTP when entered in the telephony service using the load command.
39.
Which of the following command can be used to allow the CME router to begin accepting IP phone registrations?
a. max-up
b. shutdown
c. ip source-address
d. telephony-service enable
40.
How Configuration files are created by Unified CME for the Cisco IP phones?
- Configuration files must be downloaded from Cisco and copied to the flash of the router.
- Configuration files are automatically created as configuration information is entered.
- all above are correct.
41.
What is the File name that is generated by Cisco Unified CME router for IP phones which don’t have any configuration informations?
- Config.default
- XMLDefault.cnf.xml
- Default.xml
- Emergency prompt
- None of above is true.
42.
By which of the given below commands firmware
file can be specified that is used by a Cisco 7960 Phone while contacting the
CME router?
a.
tftp-server
b.
firmware-load 7960
c. load
d.
All above are correct
43.
What mode does the CME router use for the ehpone-dn while entering the command ehpone-dn20 from global configuration mode?
a.
Dual-line
b.
Limited
c.
Distinct
d. Single-line
44.
Which of the given below features are not
allowed with an ephone-dn configured in
single-line mode?
a. Conference
b.
Speaker
c.
Hold
d.
Redial
45.
CME router need which criteria to link an ephone to a physical Cisco IP phone?
a.
MAC address and IP address
b.
IP address
c.
Serial number
d. MAC address
46.
An ephone-dn 11 (DN 2703) is needed to assign
to ephone 8 line 4 and also needed to ring the line after three pulses, By hich
of the following commands we can do this all?
a.
button 4f2703
b. button 4f11
c.
button 4:2703 feature
d.
All above are correct.
47.
By entering the following configuration
on the CME router:
CME_Voice(config)# ephone-dn 10 dual-line
CME_Voice(config-ephone-dn)# number 1010
CME_Voice(config-ephone-dn)# preference 0
CME_Voice(config-ephone-dn)# huntstop channel
CME_Voice(config)# ephone-dn 11 dual-line
CME_Voice(config-ephone-dn)# number 1010
CME_Voice(config-ephone-dn)# huntstop
CME_Voice(config-ephone-dn)# preference 1
If ephone1 is assigned ephone-dn 10 and ephone 2
is assigned ephone-dn 11 , What can be
the result?
a.
Both ephone 1 and 2 will ring on
an incoming call to 1010.
b.
Only ephone 1 will ring on an
incoming call to 1010; ephone 2 will only ring if ephone 1 is currently on a
call.
c. Only ephone 1 will ring
on an incoming call to 1010; ephone 2 will never ring, even if ephone 1 is on a
call.
d.
None of all is correct.
48.
Which of the given option is correct that how
CME supports shared-line environments that allow multiple phones to receive
calls on same DN simultaneously?
a. Using overlay
configurations
b.
Using shared-dn configurations
c.
Using feature-ring configurations
d.
All are true.
49.
The IP phone has no explicit ephone configuration
in CME currently while a Cisco IP phone attempts on register with the CME
router. What will the CME router so b default?
a. Register the phone but
not create an ephone entry in the running-config
b.
Register the phone, create an
ephone entry, and auto-assign a DN
c.
Reject the registration
d.
Register the phone and create an
ephone entry in the running-config
50.
Which
of the following represents the minimum configurations necessary to apply the
changes if a ephone 9 is
updated to use DN 1010 on line 5?
a.
The phone must be hard booted by
performing a shutdown followed by a no shutdown on the connecting switch
interface.
b.
No additional configuration is
necessary; the CME router updates the phone via SCCP.
c.
The phone must be restarted using the restart command.
d.
The phone must be restarted using
the reset command.
51.
Which
of the given below commands will change the default “Cisco Unified CME” title
displayed on the bottom of all Cisco IP phones?
a.
prompt
b.
phone banner
c. system message
d.
banner
e.
All above are true
52.
What
process must be followed to build the local phone directory for CME
environment?
a.
Assign directory entries under
each ephone-dn using the directory command.
b.
Assign directory entries under
each ephone using the directory command.
c.
CME automatically builds
the directory when you assign caller-id information with the name command.
d.
None of above is correct.
53.
A
command call-forward max-length 0 from
telephony service configuration mod, How does this will be affective for voice
network?
a.
Users can forward their phone for
an unlimited amount of time.
b.
The CFwdAll softkey on
users’ IP phones dims and becomes unavailable.
c.
Users can forward their phones to
any destination that is reachable from their IP phone.
d.
All above are correct.
54.
Which
of the given below categories of standards prevents calls from hairpinning on
the network when they are forwarded or transferred?
a.
H.225
b.
H.450
c.
H.323
d.
H.250
55.
Which
of the given below transfer modes by default does a Cisco router support?
a.
Full-consult
b.
Blind
c.
Consult
d.
All are correct
56.
What
will be the result when the command transfer-pattern 95…is entered from
telephony service configuration mode?
a.
Transferred calls have “95” added
to the end of the dialed number information.
b.
Users are now able to
transfer calls to numbers matching the 95... pattern.
c.
Transferred calls have “95” added
to the front of the dialed number information.
d.
Call transfers are restricted to
only numbers matching the 95... pattern.
57.
What
effect does this have on the voice environment if the following configuration
is entered on CME router?
CME_Voice(config)#ephone-dn
51
CME_Voice(config-ephone-dn)#number
3002
CME_Voice(config-ephone-dn)#park-slot
timeout 60 limit 10 recall
a.
This creates a call park slot
numbered 3002 that can have up to ten calls parked for 60 seconds each, at
which point the original phone is recalled.
b.
This creates a call park
slot numbered 3002 that can have a call parked for 60 seconds, at which point
the original phone is recalled. If this occurs ten times, the parked call is
disconnected.
c.
This creates a call park slot
reserved for ephone-dn 3002 that can have up to ten parked calls for 60 seconds
each.
d.
This creates a call park slot
numbered 3002 that can have up to ten parked calls for 60 seconds each.
58.
By
default, what does pressing the PickUp softkey allow to do in a Cisco Unified
CME environment?
a.
Pick up a ringing phone in your
group
b.
Pick up a specific ringing
extension (which you must specify)
c.
Answer your own ringing phone
d.
Pick up a ringing phone in another
group
59.
After
creating a new ephone-dn the
command number A100 is entered and Enter key is pressed, What is the purpose of
this command?
a.
To designate extension 100 as an
intercom line
b.
To prevent the number from
being dialed from an IP phone
c.
To match the number with number
B100 on the other side of the intercom connection
d.
To list the line as the first
intercom in the configuration
60.
What
is the maximum number of paging groups which a Cisco IP phone can belong?
a.
There is no practical limit.
b.
25
c.
1
d.
5
61.
Which
process ca be used to exempt IP phone from an after-hours call block configured
with 24/7 keyword?
a.
Enter the correct PIN number.
b.
An after-hours 24/7 call
block cannot be exempted.
c.
You must configure the user’s
phone as exempt.
d.
All above are correct.
62.
Which
is the destination to which Cisco Unified CME can send CDRs?
a.
Syslog server
b.
TFTP server
c.
HTTP server
d.
All above are correct.
63.
Which
area does Cisco Unified CME not allows to modify from the CME GUI, by defauly?
a.
Ephone
b.
The system message
c.
Ephone-dn
d.
All above are false.
64.
The
Nyquist theorem reproduces what frequency range accurately?
a. 300–4000 Hz
b.
20–20,000 Hz
c.
200–9000 Hz
d.
300–3400 Hz
65.
In
United States which forms of G.711 is used?
a.
G.711a
b. G.711 μ-law
c.
G.711ab
d.
None of above is correct
66.
How
much bandwidth consumes the audio payload of G.729a?
a.
6.3 kbps
b.
4.3 kbps
c.
16 kbps
d. 8 kbps
67.
How
many bytes per packet transmit G.729 assuming a 20-ms sample size?
a.
40
b. 20
c.
120
d.
100
68.
What amount of data does the UDP, RTP,
and IP header information add to each packet transmitted?
a.
20 bytes
b.
56 bytes
c. 40 bytes
d.
58 bytes
69.
VAD
have which functions on the voice network
a. Significant bandwidth
savings due to silence suppression
b.
The creation of redundant voice
paths over the PSTN
c.
Permits additional, compressed
calls over the IP WAN
d.
All three options are correct.
70.
Which
of the given below is high complexity codecs?
a.
G.711 μ-law
b. G.729
c.
G.729a
d.
None is wrong
71.
With
which of the given below interfaces would be equipped the router if a small
office environment is needed to trunk to PSTN using analog connections?
a.
FXS
b.
E&M
c.
FXS-DID
d. FXO
72.
Which
of the following protocols can be used to configure a VoIP environment to allow
for centralized control over all voice gatways?
a.
H.323
b.
SIP
c.
SCCP
d. MGCP
73.
On what common standard SIP signaling is
based?
a.
IETF
b. HTTP
c.
TCP
d.
UDP
74.
Which
of the given below types of interface would be used to connect an analog fax
machine to the VoIP network
a. FXS
b.
FXO
c. E&M
d.
BRI
75.
Which
of the given below commands would be used to configure a T1 line to use
channels 1-6 to connect to the PSTN using FXO loop start signaling?
a. pri-group 1 timeslots
1-6 type fxo-loop-start
b.
ds0-group 1 timeslots 1-6
type fxo-loop-start
c. pri-group 1-6 type
fxo-loop-start
d. ds0-group 1-6 type
fxo-loop-start
76.
What type of dial peer would you create, if
a configuration is needed to dial peer to connect to a PBX system using a
digital T1 CAS configuration?
a.
Analog
b. POTS
c.
VoIP
d.
Digital
77.
Following configuration is entered on voice
router: dial-peer voice 99 pots
destination-pattern 115.
port 1/0/0
What
digits the router will send out the port 1/0/0 if the number 1159 is dialed?
a.
59
b.
115
c. 9
d.
1159
e.
11
78.
Which
of the following default codec used by any VoIP dial peer?
a.
G.723
b.
G.711 μ-law
c. G.729
d.
G.711 a-law
79.
To
match any dialed number up to 32 digits in length, Which of the following
destination patterns could be used?
a.
.x
b.
[0-32]
c.
&
d. T
80.
After
creation of a translation rule how it will be allpied?
a.
To an interface
b. To a translation profile
c.
Globally
d.
Above all options are correct
81.
Under
a VoIP dial peer which of the given below digit manipulation command will work?
a. digit-strip
b. forward-digits
c. prefix
d.
translation-profile
82.
To
match an inbound dial peer for incoming calls, A router uses what final method?
a.
Using the answer-address command
b.
Using the port command
c. Using dial peer 0
d.
Using the destination-pattern command
83.
Which
of the given below is not an area that can use OoS to manage?
a. Fixed delay
b.
Packet jitter
c.
Variable delay
d.
Router queuing
83.
Which
are the four Cisco Unity Express hardware platforms that are currently
available?
a.
NM-CUE1, NM-CUE2, NMW-CUE, and
AIM-CUE
b. AIM-CUE, NM-CUE,
NM-CUE-EC, and NME-CUE
c.
CUE1, CUE2, CUE3, and CUE4
d.
AIM-CUE, NM-CUE, CUE-EC, and
NME-CUE-EC
84.
Which Cisco Unity Express module(s) is
installed inside of a Cisco router?
a.
The CUE2 and CUE4 modules
b. The AIM-CUE module
c.
The NM-CUE and AIM-CUE modules
d.
The NM-CUE module
85.
Which of the given below factor
determines the maximum number of simultaneous sessions supported by Cisco Unity
Express?
a.
The installed license
b.
The configuration
c.
The weather
d. The hardware platform
86.
Which of the following factor
determines the number of mailboxes supported by Cisco Unity Express?
a. The installed license
b.
The configuration
c.
The weather
d.
None of above.
87.
On
what operating system Cisco Unity Express runs?
a.
Cisco IOS
b.
Microsoft Windows Server 2003
c. A Linux-based operating
system
d.
Microsoft Windows Server 2000
88.
How
we can access the messages in a GDM (General Delivery Mailbox) ?
a. By logging in to a
subscriber mailbox that is associated with the GDM
b.
By logging in to the GDM extension
number via the GUI
c.
By logging in to the GDM extension
number via the telephony user interface (TUI)
d.
A GDM is not accessed. All
messages are forward to a distribution list.
89.
Which
of the following is describing the difference between pin and password in Cisco
Unity Express?
a.
Nothing; they are two terms that
mean the same thing.
b.
A password provides VoIP
authentication, whereas a PIN provides application authentication.
c. A password provides GUI
authentication, whereas a PIN provides TUI authentication.
d.
All above options are wrong.
90.
To
alert a subscriber of a new message which of the following method can use
message notification function?
a.
Red light
b. Send an e-mail
c.
Flashing envelope
d.
All above are correct.
91.
What does integrated messaging provide?
a.
Allows a subscriber’s e-mail and
voice-mail to be delivered to the same e-mail account
b.
Allows a subscriber to access both
voice-mail and e-mail content from a single MAPI-capable server
c. Allows a subscriber to
access both voice-mail and e-mail content from a single MAPI-capable e-mail
client
d.
All above are correct.
92.
Which of the following are default auto
attendant (AA) greetings/prompts.
a. Business closed prompt
b.
Alternate greeting
c.
Emergency prompt
d.
The weather
93.
How the AA prompts are recorded/re-recorded?
a.
Using the administrator’s mailbox
b.
Using a subscriber’s mailbox
c. Using the administrator
via telephone feature
d.
Using the administrator GUI home
page
94.
To
run at 2 a.m. How Cisco Unity Express backup will be configured?
a.
Set the backup schedule to begin
the backup process at 2 a.m.
b.
Set the backup schedule to begin
the backup process two hours past midnight. Starting a backup is a manual
process for Cisco Unity Express. An administrator must log in to the GUI and
click the Start Backup button to begin the process.
c. The administrator must
click the Start Backup button at
2 a.m.
d.
Because 2 a.m. is generally
outside of normal business hours, a backup cannot be scheduled for this time.
95.
How to keep configuration information
synchronized between Cisco Unity Express and Cisco Unified CME?
a.
Use the synchronize feature in the
CME CLI.
b.
Synchronization requires a reboot
of both CME and Cisco Unity Express.
c.
CME and Cisco Unity Express both operate
under the same operating system, so they cannot lose synchronization.
d. Use the synchronize
feature in the Cisco Unity Express GUI.
96.
How to make a connection to the Cisco
Unity Express CLI?
a. Issue the service-module service-engine module/port
session command from within
Cisco Unified CME
b.
Issue the cue module/port session
command from within Cisco Unified CME
c.
Telnet to the IP address of Cisco
Unity Express
d.
Connect a console cable to the
console port of Cisco Unity Express
97.
What type of server Cisco Unity Express
requires to download software?
a.
HTTP server
b. FTP server
c.
Web server
d.
TFTP server
98.
When software downloads upgrade command be used?
a.
When performing either a fresh
install or an upgrade from Cisco Unity Express version 1.x and higher.
b. When performing an
upgrade from Cisco Unity Express version 2.3.4 only.
c.
Never; Cisco Unity Express does
not currently support upgrades.
d.
Only when performing an upgrade
from Cisco Unity Express version 1.x and higher.
99.
Cisco Unity Express licenses enables which
of the following features?
a.
Number of recording hours
supported
b. Number of subscriber
mailboxes supported
c.
Number of concurrent system ports
d.
Number of languages supported
100.
Which of the given below is not configured
by the Cisco Unity Express post installation configuration tool?
a.
Cisco Unity Express’s DNS
b.
Cisco Unity Express’s hostname
c. Cisco Unity Express’s IP
address
d.
Cisco Unity Express’s NTP
e.
Cisco Unity Express’s time zone
f.
Cisco Unity Express’s
administrative credentials
42.
By which of the given below commands firmware
file can be specified that is used by a Cisco 7960 Phone while contacting the
CME router?
a.
tftp-server
b.
firmware-load 7960
c. load
d.
All above are correct
43.
What mode does the CME router use for the ehpone-dn while entering the command ehpone-dn20 from global configuration mode?
a.
Dual-line
b.
Limited
c.
Distinct
d. Single-line
44.
Which of the given below features are not
allowed with an ephone-dn configured in
single-line mode?
a. Conference
b.
Speaker
c.
Hold
d.
Redial
45.
CME router need which criteria to link an ephone to a physical Cisco IP phone?
a.
MAC address and IP address
b.
IP address
c.
Serial number
d. MAC address
46.
An ephone-dn 11 (DN 2703) is needed to assign
to ephone 8 line 4 and also needed to ring the line after three pulses, By hich
of the following commands we can do this all?
a.
button 4f2703
b. button 4f11
c.
button 4:2703 feature
d.
All above are correct.
47.
By entering the following configuration
on the CME router:
CME_Voice(config)# ephone-dn 10 dual-line
CME_Voice(config-ephone-dn)# number 1010
CME_Voice(config-ephone-dn)# preference 0
CME_Voice(config-ephone-dn)# huntstop channel
CME_Voice(config)# ephone-dn 11 dual-line
CME_Voice(config-ephone-dn)# number 1010
CME_Voice(config-ephone-dn)# huntstop
CME_Voice(config-ephone-dn)# preference 1
If ephone1 is assigned ephone-dn 10 and ephone 2
is assigned ephone-dn 11 , What can be
the result?
a.
Both ephone 1 and 2 will ring on
an incoming call to 1010.
b.
Only ephone 1 will ring on an
incoming call to 1010; ephone 2 will only ring if ephone 1 is currently on a
call.
c. Only ephone 1 will ring
on an incoming call to 1010; ephone 2 will never ring, even if ephone 1 is on a
call.
d.
None of all is correct.
48.
Which of the given option is correct that how
CME supports shared-line environments that allow multiple phones to receive
calls on same DN simultaneously?
a. Using overlay
configurations
b.
Using shared-dn configurations
c.
Using feature-ring configurations
d.
All are true.
49.
The IP phone has no explicit ephone configuration
in CME currently while a Cisco IP phone attempts on register with the CME
router. What will the CME router so b default?
a. Register the phone but
not create an ephone entry in the running-config
b.
Register the phone, create an
ephone entry, and auto-assign a DN
c.
Reject the registration
d.
Register the phone and create an
ephone entry in the running-config
50.
Which
of the following represents the minimum configurations necessary to apply the
changes if a ephone 9 is
updated to use DN 1010 on line 5?
a.
The phone must be hard booted by
performing a shutdown followed by a no shutdown on the connecting switch
interface.
b.
No additional configuration is
necessary; the CME router updates the phone via SCCP.
c.
The phone must be restarted using the restart command.
d.
The phone must be restarted using
the reset command.
51.
Which
of the given below commands will change the default “Cisco Unified CME” title
displayed on the bottom of all Cisco IP phones?
a.
prompt
b.
phone banner
c. system message
d.
banner
e.
All above are true
52.
What
process must be followed to build the local phone directory for CME
environment?
a.
Assign directory entries under
each ephone-dn using the directory command.
b.
Assign directory entries under
each ephone using the directory command.
c.
CME automatically builds
the directory when you assign caller-id information with the name command.
d.
None of above is correct.
53.
A
command call-forward max-length 0 from
telephony service configuration mod, How does this will be affective for voice
network?
a.
Users can forward their phone for
an unlimited amount of time.
b.
The CFwdAll softkey on
users’ IP phones dims and becomes unavailable.
c.
Users can forward their phones to
any destination that is reachable from their IP phone.
d.
All above are correct.
54.
Which
of the given below categories of standards prevents calls from hairpinning on
the network when they are forwarded or transferred?
a.
H.225
b.
H.450
c.
H.323
d.
H.250
55.
Which
of the given below transfer modes by default does a Cisco router support?
a.
Full-consult
b.
Blind
c.
Consult
d.
All are correct
56.
What
will be the result when the command transfer-pattern 95…is entered from
telephony service configuration mode?
a.
Transferred calls have “95” added
to the end of the dialed number information.
b.
Users are now able to
transfer calls to numbers matching the 95... pattern.
c.
Transferred calls have “95” added
to the front of the dialed number information.
d.
Call transfers are restricted to
only numbers matching the 95... pattern.
57.
What
effect does this have on the voice environment if the following configuration
is entered on CME router?
CME_Voice(config)#ephone-dn
51
CME_Voice(config-ephone-dn)#number
3002
CME_Voice(config-ephone-dn)#park-slot
timeout 60 limit 10 recall
a.
This creates a call park slot
numbered 3002 that can have up to ten calls parked for 60 seconds each, at
which point the original phone is recalled.
b.
This creates a call park
slot numbered 3002 that can have a call parked for 60 seconds, at which point
the original phone is recalled. If this occurs ten times, the parked call is
disconnected.
c.
This creates a call park slot
reserved for ephone-dn 3002 that can have up to ten parked calls for 60 seconds
each.
d.
This creates a call park slot
numbered 3002 that can have up to ten parked calls for 60 seconds each.
58.
By
default, what does pressing the PickUp softkey allow to do in a Cisco Unified
CME environment?
a.
Pick up a ringing phone in your
group
b.
Pick up a specific ringing
extension (which you must specify)
c.
Answer your own ringing phone
d.
Pick up a ringing phone in another
group
59.
After
creating a new ephone-dn the
command number A100 is entered and Enter key is pressed, What is the purpose of
this command?
a.
To designate extension 100 as an
intercom line
b.
To prevent the number from
being dialed from an IP phone
c.
To match the number with number
B100 on the other side of the intercom connection
d.
To list the line as the first
intercom in the configuration
60.
What
is the maximum number of paging groups which a Cisco IP phone can belong?
a.
There is no practical limit.
b.
25
c.
1
d.
5
61.
Which
process ca be used to exempt IP phone from an after-hours call block configured
with 24/7 keyword?
a.
Enter the correct PIN number.
b.
An after-hours 24/7 call
block cannot be exempted.
c.
You must configure the user’s
phone as exempt.
d.
All above are correct.
62.
Which
is the destination to which Cisco Unified CME can send CDRs?
a.
Syslog server
b.
TFTP server
c.
HTTP server
d.
All above are correct.
63.
Which
area does Cisco Unified CME not allows to modify from the CME GUI, by defauly?
a.
Ephone
b.
The system message
c.
Ephone-dn
d.
All above are false.
64.
The
Nyquist theorem reproduces what frequency range accurately?
a. 300–4000 Hz
b.
20–20,000 Hz
c.
200–9000 Hz
d.
300–3400 Hz
65.
In
United States which forms of G.711 is used?
a.
G.711a
b. G.711 μ-law
c.
G.711ab
d.
None of above is correct
66.
How
much bandwidth consumes the audio payload of G.729a?
a.
6.3 kbps
b.
4.3 kbps
c.
16 kbps
d. 8 kbps
67.
How
many bytes per packet transmit G.729 assuming a 20-ms sample size?
a.
40
b. 20
c.
120
d.
100
68.
What amount of data does the UDP, RTP,
and IP header information add to each packet transmitted?
a.
20 bytes
b.
56 bytes
c. 40 bytes
d.
58 bytes
69.
VAD
have which functions on the voice network
a. Significant bandwidth
savings due to silence suppression
b.
The creation of redundant voice
paths over the PSTN
c.
Permits additional, compressed
calls over the IP WAN
d.
All three options are correct.
70.
Which
of the given below is high complexity codecs?
a.
G.711 μ-law
b. G.729
c.
G.729a
d.
None is wrong
71.
With
which of the given below interfaces would be equipped the router if a small
office environment is needed to trunk to PSTN using analog connections?
a.
FXS
b.
E&M
c.
FXS-DID
d. FXO
72.
Which
of the following protocols can be used to configure a VoIP environment to allow
for centralized control over all voice gatways?
a.
H.323
b.
SIP
c.
SCCP
d. MGCP
73.
On what common standard SIP signaling is
based?
a.
IETF
b. HTTP
c.
TCP
d.
UDP
74.
Which
of the given below types of interface would be used to connect an analog fax
machine to the VoIP network
a. FXS
b.
FXO
c. E&M
d.
BRI
75.
Which
of the given below commands would be used to configure a T1 line to use
channels 1-6 to connect to the PSTN using FXO loop start signaling?
a. pri-group 1 timeslots
1-6 type fxo-loop-start
b.
ds0-group 1 timeslots 1-6
type fxo-loop-start
c. pri-group 1-6 type
fxo-loop-start
d. ds0-group 1-6 type
fxo-loop-start
76.
What type of dial peer would you create, if
a configuration is needed to dial peer to connect to a PBX system using a
digital T1 CAS configuration?
a.
Analog
b. POTS
c.
VoIP
d.
Digital
77.
Following configuration is entered on voice
router: dial-peer voice 99 pots
destination-pattern 115.
port 1/0/0
What
digits the router will send out the port 1/0/0 if the number 1159 is dialed?
a.
59
b.
115
c. 9
d.
1159
e.
11
78.
Which
of the following default codec used by any VoIP dial peer?
a.
G.723
b.
G.711 μ-law
c. G.729
d.
G.711 a-law
79.
To
match any dialed number up to 32 digits in length, Which of the following
destination patterns could be used?
a.
.x
b.
[0-32]
c.
&
d. T
80.
After
creation of a translation rule how it will be allpied?
a.
To an interface
b. To a translation profile
c.
Globally
d.
Above all options are correct
81.
Under
a VoIP dial peer which of the given below digit manipulation command will work?
a. digit-strip
b. forward-digits
c. prefix
d.
translation-profile
82.
To
match an inbound dial peer for incoming calls, A router uses what final method?
a.
Using the answer-address command
b.
Using the port command
c. Using dial peer 0
d.
Using the destination-pattern command
83.
Which
of the given below is not an area that can use OoS to manage?
a. Fixed delay
b.
Packet jitter
c.
Variable delay
d.
Router queuing
83.
Which
are the four Cisco Unity Express hardware platforms that are currently
available?
a.
NM-CUE1, NM-CUE2, NMW-CUE, and
AIM-CUE
b. AIM-CUE, NM-CUE,
NM-CUE-EC, and NME-CUE
c.
CUE1, CUE2, CUE3, and CUE4
d.
AIM-CUE, NM-CUE, CUE-EC, and
NME-CUE-EC
84.
Which Cisco Unity Express module(s) is
installed inside of a Cisco router?
a.
The CUE2 and CUE4 modules
b. The AIM-CUE module
c.
The NM-CUE and AIM-CUE modules
d.
The NM-CUE module
85.
Which of the given below factor
determines the maximum number of simultaneous sessions supported by Cisco Unity
Express?
a.
The installed license
b.
The configuration
c.
The weather
d. The hardware platform
86.
Which of the following factor
determines the number of mailboxes supported by Cisco Unity Express?
a. The installed license
b.
The configuration
c.
The weather
d.
None of above.
87.
On
what operating system Cisco Unity Express runs?
a.
Cisco IOS
b.
Microsoft Windows Server 2003
c. A Linux-based operating
system
d.
Microsoft Windows Server 2000
88.
How
we can access the messages in a GDM (General Delivery Mailbox) ?
a. By logging in to a
subscriber mailbox that is associated with the GDM
b.
By logging in to the GDM extension
number via the GUI
c.
By logging in to the GDM extension
number via the telephony user interface (TUI)
d.
A GDM is not accessed. All
messages are forward to a distribution list.
89.
Which
of the following is describing the difference between pin and password in Cisco
Unity Express?
a.
Nothing; they are two terms that
mean the same thing.
b.
A password provides VoIP
authentication, whereas a PIN provides application authentication.
c. A password provides GUI
authentication, whereas a PIN provides TUI authentication.
d.
All above options are wrong.
90.
To
alert a subscriber of a new message which of the following method can use
message notification function?
a.
Red light
b. Send an e-mail
c.
Flashing envelope
d.
All above are correct.
91.
What does integrated messaging provide?
a.
Allows a subscriber’s e-mail and
voice-mail to be delivered to the same e-mail account
b.
Allows a subscriber to access both
voice-mail and e-mail content from a single MAPI-capable server
c. Allows a subscriber to
access both voice-mail and e-mail content from a single MAPI-capable e-mail
client
d.
All above are correct.
92.
Which of the following are default auto
attendant (AA) greetings/prompts.
a. Business closed prompt
b.
Alternate greeting
c.
Emergency prompt
d.
The weather
93.
How the AA prompts are recorded/re-recorded?
a.
Using the administrator’s mailbox
b.
Using a subscriber’s mailbox
c. Using the administrator
via telephone feature
d.
Using the administrator GUI home
page
94.
To
run at 2 a.m. How Cisco Unity Express backup will be configured?
a.
Set the backup schedule to begin
the backup process at 2 a.m.
b.
Set the backup schedule to begin
the backup process two hours past midnight. Starting a backup is a manual
process for Cisco Unity Express. An administrator must log in to the GUI and
click the Start Backup button to begin the process.
c. The administrator must
click the Start Backup button at
2 a.m.
d.
Because 2 a.m. is generally
outside of normal business hours, a backup cannot be scheduled for this time.
95.
How to keep configuration information
synchronized between Cisco Unity Express and Cisco Unified CME?
a.
Use the synchronize feature in the
CME CLI.
b.
Synchronization requires a reboot
of both CME and Cisco Unity Express.
c.
CME and Cisco Unity Express both operate
under the same operating system, so they cannot lose synchronization.
d. Use the synchronize
feature in the Cisco Unity Express GUI.
96.
How to make a connection to the Cisco
Unity Express CLI?
a. Issue the service-module service-engine module/port
session command from within
Cisco Unified CME
b.
Issue the cue module/port session
command from within Cisco Unified CME
c.
Telnet to the IP address of Cisco
Unity Express
d.
Connect a console cable to the
console port of Cisco Unity Express
97.
What type of server Cisco Unity Express
requires to download software?
a.
HTTP server
b. FTP server
c.
Web server
d.
TFTP server
98.
When software downloads upgrade command be used?
a.
When performing either a fresh
install or an upgrade from Cisco Unity Express version 1.x and higher.
b. When performing an
upgrade from Cisco Unity Express version 2.3.4 only.
c.
Never; Cisco Unity Express does
not currently support upgrades.
d.
Only when performing an upgrade
from Cisco Unity Express version 1.x and higher.
99.
Cisco Unity Express licenses enables which
of the following features?
a.
Number of recording hours
supported
b. Number of subscriber
mailboxes supported
c.
Number of concurrent system ports
d.
Number of languages supported
100.
Which of the given below is not configured
by the Cisco Unity Express post installation configuration tool?
a.
Cisco Unity Express’s DNS
b.
Cisco Unity Express’s hostname
c. Cisco Unity Express’s IP
address
d.
Cisco Unity Express’s NTP
e.
Cisco Unity Express’s time zone
f.
Cisco Unity Express’s
administrative credentials
I hope these MCQs will help you :) :)